The,Seven,distinct,steps,requi DIY The Seven distinct steps required to produce Bronze Buddha s
When starting a new work at home business it is very easy to become consumed by it. We spend so much time trying to get the business up and running that we may end up becoming burned out and lose our motivation. There is so much to learn and Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable{mso-style-name:"Table Normal";mso-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-parent:"";mso-padding-alt:0in
After setting, the mold is cut in half to remove the original sculpture and sectioned into pieces to facilitate the remaining steps in the casting process.Step 2: Making a Wax Likeness From the MoldA thin coating of wax is hand painted onto the inside of each piece of the sectioned mold. This is done to ensure that the wax completely captures every nuance of the mold. After setting, individual pieces are assembled into the major sections of the mold; e.g., base, torso, extremities, etc. Molten wax is poured into the assembled molds, which are rotated throughout the process to allow wax to build up on the primer coating. The process is continued until the wax reaches a uniform thickness of roughly 3/8 in all areas. After the wax has cooled, the latex and silicone outer shell is removed from each section, revealing exact wax likenesses of the original sculpture. Artisans buff and finish them, removing any imperfections arising the molding process.Step 3: Making a Casting Mold From the Wax LikenessThe wax likenesses are each dipped into a mixture of plaster and sand. This process is repeated several times using increasingly course sand and plaster mixtures. Each layer must be allowed to dry before additional layers can be applied. After several layers are applied and allowed to set, a thick, a rigid clay shell is formed around the wax likeness. Often referred to as investment casting, the clay shell, once complete, is made ready for bronze casting by artisans who apply runners and vents to the shell to permit molten bronze to enter the shell and hot gases and excess metal to escape.Step 4: Burn Out Losing the WaxThe clay shells, which have now been allowed to harden around the wax likenesses, are placed upside down in a kiln and baked at high temperatures. High temperature baking hardens the clay shells into bronze-ready molds and at the same time melts away the internal wax likenesses, giving rise to the term Lost Wax. The melted wax flows from the casts through runners and vents, resulting in hollowed, fire-hardened clay molds, now ready for bronze casting.Step 5: Bronze CastingMolten bronze is immediately poured into the hardened clay casts and allowed to cool. Once cooled, the outer clay shell is carefully chipped away from each section by hand, revealing the cast bronze figures, now ready for final assembly and finishing.Step 6: Assembling the Sections and Finishing the SculptureArtisans carefully and painstakingly reassemble sections of the sculpture and finish the seams and rough edges to produce a flawless finished product, ready for coloration and patina.Step 7: Finishing and Coloring the SculptureThe finished sculpture is finely detailed and hand polished prior to coloration and accenting. Artists apply chemicals, pigments and heat by hand to produce the striking visual beauty and extraordinary coloration that is an essential element bringing to life every Big Bronze sculpture.
The,Seven,distinct,steps,requi