Using,The,Concrete,Saw,Safely, DIY Using The Concrete Saw Safely
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable{mso-style-name:"Table Normal";mso-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-parent:"";mso-padding-alt:0in When starting a new work at home business it is very easy to become consumed by it. We spend so much time trying to get the business up and running that we may end up becoming burned out and lose our motivation. There is so much to learn and
Injuries can happen when using concretecutting tools inappropriately. There are different types of toolsused to cut concrete, and a concrete saw is one of them. Each toolcomes in handy as long as the operator knows how to use them right. The first thing the user should do isexamine the saw. Inspection may seem easy, but there are a lot ofdifferent parts that needs checking. Take note of the following:The pin hole should not bedistorted.The steel core of the blade shouldbe free of cracks, which is a sign of wearing out. If the blade hascracks, dont use the tool, to avoid failure or injury.The edge of the steel core shouldnot be discolored. Bluish discoloration indicates oxidation andoverheating due to inadequate cooling. Overheating can result inblade failure and loss of core tension. The width of the steel core shouldbe uniform. An uneven width is probably due to undercutting.The blade should be properlyoriented according to the direction of rotation. The diamond segments or rim shouldshow no cracks and missing parts. A blade whose rim has missingparts should not be used. Using the blade with missing parts caneither damage the saw further or injure the operator. Make sure that you are using theright concrete saw. Read the specifications first before using thetool to check that it matches the sawing work you intend to use thetool for. Using an inappropriate blade results in inefficient workperformance and possible damage to the cutting tool. Water should be at hand when usingcutting tools with wet blades. The water acts as a coolant.The arbor holes diameter shouldmatch the blades. Both should show no distortion. Moreover, usethe right blade collars or flanges, which should be free of debris. Concrete saws have maximumsafe rotational speed. Check the maximum RPM of your tool and makesure it does not exceed that number when you use it. Excessivelyhigh RPM of your saw causes fast deterioration of the blade andconsequently inefficient performance. The blade guards should befunctioning correctly. Do not use the saw without the blade guardsin place. Also, do not use the saw if the blade exposure is morethan 180 degrees. The blade guard should not be raised.You must wear protective gearbefore sawing. Many people do not follow this simple reminder. Theyend up with injuries leaving them unable to work for a week or more.Mark the path on the concretealong which you will make a cut. You can use a chalk to mark thisline. This guide ensures that you do not make dreadful mistakes whencutting concrete.Raise the saw over the specifiedconcrete surface. Then start the engine, allowing the cutting toolto reach its optimum operating speed. Lower the blade on the area ofthe concrete to be cut. Check that the diamond blade does not godeeper than the maximum cutting depth. The arbor flanges should nottouch the concrete. When the cutting is done, raisethe saw blade and turn off the engine.
Using,The,Concrete,Saw,Safely,