How,determine,preliminary,type business, insurance How to determine preliminary type of foundation without Soil
Small offices have unique needs, and thatincludes document shredding. Designed with the smaller business inmind, the Dahle 20314 is a cross-cut shredder that offers Level 3security and brings you into compliance with federal regulations. The As we all know to live in this world we have to perform some activity by which we can earn money. There are many activities by which we can earn money and meet the standards to live in this society. And from one of them is franchise. Franc
Reading Level: BeginnerNormally before construct a building, we need to check soil condition for that building. It can be done by carried out soil investigation(SI). The analysis of SI report can be used for determine type of foundation.As a consulting engineer, it will be often that engineer need to prepare RC drawings for client. Client need it for quantities purpose. Normally, SI will carry out at the later stage i.e. after the earthworks completion.As a result, how do consulting engineer to carry out preliminary selection of foundation?Preliminary selection of foundation can be based on the earthworks drawings. A simple way is refering to the cut and fill area in earthworks drawings. Where cut area will select as pad foundation and fill area will select as pile foundation. When fill area is less than 1.2m, it still can be used as footing foundation because footing need a certain depth for construct.Another method of determination is by on site excavation, engineer need to go to site to witness the ground condition.Engineer can observe how the excavator excavate earths. Will the excavator can easy remove the soil. Will soil is loose at vertical sides of excavation hole. If the answer is YES, then ground is soft. It can be recommended to use pile foundation else pad foundation can be recommended. Article Tags: Fill Area
How,determine,preliminary,type