Preventive,Maintenance,Reactiv business, insurance Preventive Maintenance vs Reactive Maintenance
Small offices have unique needs, and thatincludes document shredding. Designed with the smaller business inmind, the Dahle 20314 is a cross-cut shredder that offers Level 3security and brings you into compliance with federal regulations. The As we all know to live in this world we have to perform some activity by which we can earn money. There are many activities by which we can earn money and meet the standards to live in this society. And from one of them is franchise. Franc
Top priorities for 2013 varied but circled three major themes: 1. Improving inventory tracking and organization - moving from corrective (reactive) to preventive maintenance.2. Reducing asset downtime and increasing overall reliability (thereby reducing total costs).3. Improved worker communication and effectiveness through greater utilization of mobile maintenance systems.Reactive maintenance is quite common and may be defined simply as the practice of replacing or repairing assets after they fail to operate properly and is often deployed with low-cost assets that can be readily replaced. Preventive maintenance (PM) is most commonly pursued when assets are more costly and/or are critical to a plants operations. Examples of PM may include periodic adjustments, lubrication, part replacement, and so on. Ideally maintenance programs incorporate a mix of reactive, preventive, and predictive maintenance practices. Best practices indicate that 50% or more of maintenance management should actively leverage preventive and predictive maintenance habits. Despite this, studies reveal that exclusively or largely reactive maintenance programs remain the norm in the U.S. In a recent study, the average maintenance program of a typical facility breaks down as: >55% Reactive 31% Preventive 12% Predictive 2% Other (Source: http://www1.eere.energy.gov/femp/pdfs/OM_5.pdf) This is most often attributed to the low (initial and short-term) costs of reactive maintenance. However, when the longer view is taken, reactive maintenance has hidden and cumulative costs that can eclipse the maintenance operating budget and sideswipe critical maintenance operations. Below is a simple comparative chart of the pros and cons of both types of maintenance: Reactive Pros Low Cost Less Staff Reactive Cons Increased cost (e.g., unplanned downtime Increased labor cost (e.g., overtime) Increased repair or replacement costs Possible secondary equipment or process damage (due to equipment failure) Inefficient use of staff resourcesPreventive Pros Cost effective even in many capital-intensive processes Flexibility allows for adjustment of maintenance frequency Increased component life-cycle Energy savings Reduced process or equipment failure Estimated 12% to 18% greater cost savings than reactive maintenancePreventive Cons Catastrophic failures still likely to occur Labor intensive Includes performance of unneeded maintenance Potential for incidental damage to components in conducting unneeded maintenanceAccording to the U.S. Department of Energy (DOE), the U.S. Navy pioneered preventive maintenance to increase their vessels reliability, a truly mission critical initiative. In the DOE report, O&M Best Practices Guide, Release 3.0, they state that while additional resources are required upfront, that by expending them and conducting preventive maintenance activities, equipment life and reliability is substantially extended. The DOE report (referenced in the above table) concords that the benefits gained by implementing preventive maintenance far outweigh the benefits of relying on a reactive maintenance program. (Source: http://www1.eere.energy.gov/femp/pdfs/OM_5.pdf)
Preventive,Maintenance,Reactiv