Ensure,top,cars,battery,endura car Ensure top rc cars battery endurance
General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling
You can easily find the best batteries for your rc cars. In view of the longer running times and the relationship power weight are achieved using Lipo, it is worth the effort to learn to handle correctly.If you know how to use and properly treat these batteries, their life is much longer than NiCd and NiMh. But if not done properly break down in very few applications (Even just 1) and can become a really dangerous if not material used properly. Therefore we suggest you read this manual or at least its first part, Concepts and basic standards will help you avoid mistakes. Basic concepts and standards:Ø To choose the most suitable package for your model:Ø You must know the actual maximum power your engine configuration (propeller or pinion) the peak consumption must be less than the maximum discharge that the pack is able to develop, use a Lipo pack always at full download, although it will not be able to give the desired performance and life of the pack is shortened. On the balance between the elements of a pack manufacturers are balanced in their time of manufacture recommend checking the voltage of each rc cars connector element using the intermediate points pack before first use. Also you should check the voltage of each element every 25 uses or once every 3 months. Only if there is an imbalance between elements than 0.1 V then you should go for a balance test before use using rc cars balancer packs or loading each element separately through the connector points in between. Do not make a balance by loading each element separately if the pack is balanced. The pack after manufacture is usually found at half load or uploaded.If the pack is to be used for discharges to 2C above must be made 3 or more charge /discharge at 1C or less before use. The terms of use are important:ü Be sure to use a charger capable of charging batteries Polymer Lithium. Do not use other charger.ü Load in a fireproof container or area. Never in the model or inside a vehicle.ü Be sure to plan well for the charger to properly pack in voltage and intensity.ü Do not charge your Lithium Polymer batteries with higher intensity for 1C. Doing so will reduce the capacity and battery life with very little savings load time. They can be charged under 1C is even recommended.Finally but not least, experts recommend rc cars battery load current of 0.2 C and 0.7 C.
Ensure,top,cars,battery,endura