Changing,Your,Own,Oil,Going,Pr car Changing Your Own Oil or Going Pro
General Lee: For such a TSP platform, indeed, is the test of the ability to integrate the same time, just She always has been mentioned in the business platform is a completely independent intellectual property platform and our platform is t In the shape of the design, the Core wing broke through the traditional appearance of the other models, the Core-wing sense of movement and high-level sense of the high degree of balance, which must be improved, both in the interior styling
Some people prefer to bring their car in to a professional for an oil change, but for the rest of us, DIY is the way to go. For even less (in some cases) you can purchase the materials and change your car's engine lubricant by yourself or with a friend. Be sure that you have the right materials, you can fit under the car, and then you research how to dispose of the used oil you'll be draining from your car.Materials Needed for a Do-It-Yourself Oil ChangeGather 4 to 6 quarts (whichever brand you choose), a new filter, wheel ramps (if you need to raise the car), wood blocks, a socket wrench, a filter wrench, a drain pan, absorbent protection (for any spills), safety glasses, a funnel, an old rag, and hand cleanser.Process to Follow for a Do-It-Yourself Oil ChangeYou'll need to drive your vehicle to a level area. If you need to lift it off the ground to give yourself room to work, drive it up onto the wheel ramps. Be sure to engage the emergency brake and wedge some wood blocks behind the back tires so the car won't roll while you're working underneath it.Next, loosen the sump cap that's under the hood then open the drain plug. Be sure to place the drain pan under the plug before you remove it. You'll also want to be sure to open the oil drain and not the drain for the transmission fluid!Use the filter wrench to turn the filter in a counterclockwise direction and remove it. Don't let it tilt to the side since it's full of dirty oil! Instead, empty it into the drain pan beneath your car hood. Clean around the area where the filter sits with a used rag.Pull out the new filter and wipe some new oil around the gasket. This will act as a sealant when you install the new filter. Screw in the new filter, not too tightly, but definitely snug. Then you'll want to clean off any dirt or old oil that are clinging to the pan or plug. Then replace the plug.Now you'll fill the tank with new oil. Your owner's manual will tell you how many quarts you'll need to complete your oil change. If you're not picky about the brand you use in your car, you can get some great deals with current coupons or sales. Once you've refilled the tank, tighten the sump cap again.
Changing,Your,Own,Oil,Going,Pr