Cisco,CCNA,Certification,Train computer Cisco CCNA Certification Training Tutorial: PPP Multilink A
Gone are those times when the companies and the organisations didn't need a hi-tech system to handle them. Owing to the considerable increase in the business sector and thus, an enormous increase in the complexity of the organisational struc ----------------------------------------------------------Permission is granted for the below article to forward,reprint, distribute, use for ezine, newsletter, website,offer as free bonus or part of a product for sale as longas no changes a
Earning your CCNA certification means you have to notice details about Cisco routers that others might miss, and that's true in the exam room and on the job. In today's tutorial, we'll take a look at multilink PPP - a topic that seems simple enough, but has details that trip up some CCNA certification candidates.ISDN BRI (Basic Rate Interface) has two B-channels that both carry data, and they each have a capacity of 64 KBPS. Interestingly enough, they don't share the load by default - the first channel has to be at capacity before the second channel starts taking some of the load. It's more efficient to have the channels share the load before then, and we can do just that by configuring PPP multilink. (Note that it's called PPP multilink for a reason. We can't configure it if the BRI interface is running at the default of HDLC.)Configuring PPP multilink is simple enough. PPP must be running on the interface to begin with, and then you simply configure the interface with the "PPP multilink" command.R1(config)#int bri0R1(config-if)#encapsulation pppR1(config-if)#ppp multilinkHere's where knowing the details comes in handy. An additional command, "dialer load-threshold", is needed to define the capacity level of the first b-channel that will bring up the second b-channel. For example, let's say we want the second channel to come up when the first channel hits 50% of its capacity. It's easy to think that we would put "50" at the end of the dialer load-threshold command, but that's wrong! Look at what IOS Help tells us about this command.R1(config-if)#dialer load-threshold ?Load threshold to place another callThis value is based on 255, not 100. To bring the second channel up as described earlier, we need to enter a value that is 50% of 255:R1(config-if)#dialer load-threshold 127The dialer load-threshold command has other options not shown here. The interface can be configured to consider only incoming or outgoing traffic for this command, or both. This is just one of the many details you must master in order to earn your CCNA certification. Take it from me - it's worth it. Keep studying! Article Tags: Ccna Certification, Second Channel, Dialer Load-threshold
Cisco,CCNA,Certification,Train