How,Install,CISS,Epson,Continu computer How to Install CISS in Epson
Gone are those times when the companies and the organisations didn't need a hi-tech system to handle them. Owing to the considerable increase in the business sector and thus, an enormous increase in the complexity of the organisational struc ----------------------------------------------------------Permission is granted for the below article to forward,reprint, distribute, use for ezine, newsletter, website,offer as free bonus or part of a product for sale as longas no changes a
ContinuousInk Supply System is gaining popularity due to its economical and costeffective attributes. The cost per page is 20-30 times less than the cost perpage printed by using printer cartridges. The CISS is easy to install, ready to use and savesthe cartridge replacement time. It is ideal solution for those who needfrequent printouts daily. There few verysimple steps to follow for installing CISS in your Epson printer:- Bring all the accessories at your printer tableand check for any air in the printing tubes. - Check the printer for nozzle test, it isrecommended to print nozzle test sheet- If your printer is working perfectly, take out acolored printout before you install CISS.- Place the CISS on right side of the printer andkeep the air plugs out and install the air filters.- Choose Main menu ->maintenance->cartridgechange->cartridge change tools->next step->next step->confirm- Take the cartridge out by lifting up cartridgecover and opening it through screw driver.- Take out the Epson cartridge inside the printerand move the cartridge carrier to the left, now install the CISS cartridge intothe printer and adjust the cartridge at the right place.- It is very important to move the button chip atthe right place otherwise the CISS will not be recognized by the printer.- In order to check the tube length move thecartridge carrier to the left and then to the right side and verify that theink tube falls on paper board.- If there is any problem in the tube length youcan adjust it by shortening or increasing its size, the sticker can also beadjusted to prevent tube from falling.- Carefully watch the sticker it should not squeezethe ink tube when the printer cover or paper cover is closed.- Now plug in the printer wire, close the printercover and take a test printout also check if the printer makes any noise.- It is also recommended to check the printernozzle for any errors, if it is working smoothly the CISS is installed perfectly alternatively the nozzle should bechecked and cleaned properly, still if it shows missing lines or color fade turnoff the printer for an hour and then turn it on again.The CISS is bit different from the conventional cartridge installingand changing procedure therefore it is advised to check all the accessories whenthe CISS kit is received and the steps should be followed carefully.
How,Install,CISS,Epson,Continu