Quality,Check,LSAW,Steel,Pipe, technology Quality Check of LSAW Steel Pipe
The electronic cigarette is not new. People who buy electronic cigarette knows that this product has been in the market for years now. Despite some sectors apparently trying to shoot the product down from the shelves, the popularity of elect Active shredder safety technology for the small office. Shreds 15sheets per pass into 5/32" x 1-1/2" cross-cut particles (Security Level3). Patented SafeSense® Technology stops shredding when hands touch thepaper opening. Designated shredde
LSAW steel pipe quality check methods, during which the physical approach is the most commonly used inspection methods, physical examination is the use of physical phenomena to determine or check the method.Magnetic forceMagnetic flaw detection can only find the appearance and appearance of magnetic straight seam welded pipe shortcomings, and the shortcomings can only do quantitative analysis, the nature and depth of the shortcomings can only be based on experience to estimate. Magnetic inspection is the use of magnetic field magnetization of ferromagnetic Longitudinal Welded Mild Steel Pipe leakage occurred to find the shortcomings. According to the measurement of magnetic flux leakage method is not the same, can be divided into magnetic powder method, magnetic induction method and magnetic recording method, during which the most widely used magnetic powder method.Soaked inspectionPenetration test is the use of some of the liquid permeability and other physical properties to discover and show shortcomings, including the color check and fluorescence detection of two, can be used to view the appearance of ferromagnetic and non-ferromagnetic material shortcomings.Ray detectionRadiographic testing is the use of ray penetrable material and attenuation in the material properties to detect defects in a method of detection. According to the different rays used in flaw detection, can be divided into X-ray detection, γ-ray detection, high-energy ray detection of three. Because of its shortcomings are not the same way, each ray detection are divided ionization method, fluorescent screen observation, photography and industrial television law. Ray inspection is mainly used to check the longitudinal seam weld internal cracks, not penetration, pores, slag and other shortcomings.Ultrasonic flaw detectionUltrasound in metal and other homogeneous media, because in the same media interface will occur on the reflection, and thus can be used for internal defects inspection. Ultrasonic can detect any weldment data, any part of the shortcomings, and can more sensitive to find the defect orientation, but the nature of the defect, shape and size of the more difficult to determine. So Longitudinal welded steel pipe Ultrasonic flaw detection and cooperation often used.
Quality,Check,LSAW,Steel,Pipe,