How,Choose,The,Right,Stainless technology How To Choose The Right Stainless Steel Grade
Active shredder safety technology for the small office. Shreds 15sheets per pass into 5/32" x 1-1/2" cross-cut particles (Security Level3). Patented SafeSense® Technology stops shredding when hands touch thepaper opening. Designated shredde The electronic cigarette is not new. People who buy electronic cigarette knows that this product has been in the market for years now. Despite some sectors apparently trying to shoot the product down from the shelves, the popularity of elect
Selecting the right stainless steel grade for an application is important in order to achieve a sustainable solution, while cost aspects must also be taken into consideration. MSME Mahurangi Sheet Metals and Engineering explains in this article how to make the right choice. There are several stages when material selection needs to be made: 1. New applications and equipment 2. New processes and process changes 3. Exchange of material due to poor performance 4.Exchange of existing material to minimize costFor the right material selection it is important to get a full picture of the service conditions the steel will face. The first aspects to consider are related to the material:Corrosion resistance 2. Mechanical strength 3. Fabricability 4. Physical properties 5. Surface aspectsOther factors that may influence the decision are:Possibilities for weight reduction 2. Availability 3. Cost 4. Life Cycle Cost (LCC) 5. Recyclability 6. Legislation, standards, and approvals 6. Previous experienceCorrosion resistanceCorrosion engineering uses corrosion data from the environment in which the material is to be exposed. Field testing in, or laboratory testing to simulate, the environment is often required in order to identify which grades would be most suitable.Strength and fabricabilityDesigning load-bearing structural applications, such as bridges, pressure vessels, and structural automotive components, is mostly done by applying the mechanical strength data provided in national and international standards and design codes.High temperaturesEquipment to be used at elevated temperatures (above 550 °C) is designed using creep and oxidation data, and previous experience is important when selecting material. In many applications the material is consumed after a period of time. For more information visit us at: http://msme.co.nz or www.facebook.com/MSMELTD
How,Choose,The,Right,Stainless